HOT ! 670 Brown Men\'s Cowboy Boots

Primeboots Men\'s Cowboy Boots 670 Arizona Espanol Afelpado Whiskey

Classic men\'s western boots! Handmade in Spain!

• The entire interior is made of soft pigskin.


• When processing the inner lining there are no exposed seams.


• The use of a comfort insert and the partially padded insole significantly increases wearing comfort.


• The comfort insert is located between the insole (inner sole) and the outsole and gives the boot great flexibility after a certain break-in phase.

• To make it easier to put on, two pull-on straps are included.


• The two-layer leather sole is sewn to the outer frame.


• The pointed 7910 PPTL lasts from Primeboots have a comfortable fit and instep height.


• The boot shaft is relatively narrow.

Dimensioning:

• The cowboy boot Primeboots 670 Arizona Espanol Afelpado Whiskey has a shaft height of approx. 32 cm.
• The rubberized 7910 PPTL full -leather heel has a height of approx. 5 cm.


• The boot has a shaft circumference of approximately 35 cm. However, depending on the boot size, the circumference can decrease or increase by approximately 1-2 cm.

Important information and tips:

• Due to the handmade manufacturing process of Primeboots products, differences in colour or design may occur compared to the items shown!


• Each pair of Primeboots boots and ankle boots is unique!


• Roughened and waxed leathers ( AFELPADO & ARIZONA ) require special care products.
• When using the Goodyear Welted manufacturing process, a small break-in phase must always be taken into account!

If you use the boots daily, Primeboots recommends fitting them with a protective leather or rubber insole. The soles of the boots should always be resoled after a break-in phase!