HOT ! Prop Package (No Controller) Halloween - 4 Ghosts

Description

Our Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer/showtime director if it is the only Unit in the show. The props in this package must be assigned to specific Unit IDs in order to work with our RGBPlus Halloween sequences.

S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.

Included in this Package:

• 4 Coro Ghost - 2 Big and 2 Small - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.




• Big Ghosts (2) - 37\" tall x 23.5\" wide


• Small Ghosts (2) - 30\" tall x 23.5\" wide
  


• 10mm White Coro




• 8 Strands of White Bullet Pixels - 50 Ct (4\" spacing) - To make 4 sets of 100. LOR Style connectors.




• Dangles not included. The controller you use needs dangles installed.

Not Included:

• Pixel Extensions


• Mounting material for home attachment


• Metal stakes or other ground mounting material

Our Prop Packages (no controller) can be used in a display with custom sequencing as long as the controller\'s Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. If you\'re looking for a package with the controller included, consider purchasing a CPC Kit (Coro, Pixels, Controller) instead.

Kit Assembly

Pixels are not pre-pushed. Assembly is to be completed by the customer. 

When viewing the ghosts from the back, the Pixel Path \"star\" (for \"start\") should be at near the bottom left of the prop, with the pixel path continuing clockwise until it reaches the \"square\" (for \"stop\") on the bottom of the prop.

The ghosts are interchangeable in size - any size ghost can be plugged into any port of your Pixie4 Controller.

RGBPlus Sequences

To use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the AuxA network on your computer or Net 2 of your N2-G4 or N4-G4 Showtime Director. The Pro license level is required to play RGBPlus sequences. The software version required is listed on each RGBPlus sequence purchase page.

When viewing the ghosts as the audience, the first of the four ghosts should be on the left of a horizontal row or the front of a vertical row. The ghosts are interchangeable in size - any size ghost can be plugged into any port of your Pixie4. When viewing the ghosts from the back, the Pixel Path \"star\" (for \"start\") should be at near the bottom left of the prop, with the pixel path continuing clockwise until it reaches the \"square\" (for \"stop\") on the bottom of the prop.

The props in this package must be connected to Unit IDs 21, 22, 23 and 24, both physically on your controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by clicking here.

Learn more about using these props with our RGBPlus Sequences and altering networks/Unit IDs by clicking here.

Warranty