HOT ! MovinCool Climate Pro X20

Powerful cooling where you need it—fast.

The MovinCool Climate Pro X20 delivers targeted cooling for hot work zones, equipment areas, and occupied spaces without permanent installation.

• 
  Cools people and equipment fast in hot indoor environments
  


• 
  Portable and flexible—roll it exactly where cooling is needed
  


• 
  Handles tough jobs like factories, server rooms, and repair bays
  


• 
  No complex install—plug in and start cooling
  

Why it matters: When heat slows productivity or risks equipment, you need reliable cooling right away. The X20 gives you instant relief without downtime.

Key Features

• 20,000 BTU cooling power for medium-sized zones


• Dual cold air ducts for targeted spot cooling


• Air-cooled, self-contained system


• Digital controls with programmable settings


• Automatic restart after power loss


• Washable air filters for easy maintenance


• Heavy-duty casters for mobility


• Optional condensate pump kit available

Additional Specifications

MovinCool Climate Pro X20 Owner\'s Manual
MovinCool Climate Pro X20 Product Spec Sheet
Warranty	MovinCool\'s Office Pro, Classic, Classic Plus, and Climate Pro models come standard with 1-year parts and labor coverage.Registered products are eligible to receive full 3-year parts and labor coverage including the compressor.
NOTE: Specifications subject to change without notice. All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from the specifications listed above.

Accessories & Optional Components

All accessories are sold separately.All accessories are sold individually unless otherwise noted.Exhaust duct required in most cases.

All MovinCool Climate Pro X-Series Spot Coolers include two 5-inch diameter Quick-Connect adjustable nozzles.

1. Quick-Connect Dual Duct – 484209-0500Easily change the (included) 5-inch quick-connect single nozzles to dual-duct nozzles that extend up to 2-feet in length. Divide each 5-inch nozzle opening into two 4-inch outlets to multiply your cooling options.

If your application requires cooling further away from the unit than 2-feet, the following accessories are recommended.

2. Two Hole Base Plate (Supply Air Nozzle Adapter Kit) - 481769-0310Base plate has two 5-inch diameter holes to convert the airflow from factory-installed quick-connect nozzles to extended nozzles.

3. Supply Air Flange Kit - 481170-04505-inch diameter flange kit includes wire clamp and mounting screws. (Used to attach the self-supported cold air duct to the two-hole base plate.)

4. Self-Supported Cold Air Duct - LA481744-04205-inch diameter self-supported duct extends from 6.5-ft to 10-ft in length. Provides specific, directional airflow.

5. Trim-Ring - 481851-02005-inch diameter Trim Ring mounts on the end of the self-supported duct.(Not required, but the trim ring prevents sharp edges and/or unraveling and completes the look.)

6. Outdoor Air (Heat Exchanger) Plenum - 484350-1160For Negative Pressure Rooms - When balanced airflow is required, attached the outdoor heat exchanger plenum with a 12-inch diameter duct from the side of the unit to an outside air source. The air to the outdoor heat exchanger is pulled from outside the room to eliminate problems associated with negative pressure. It attaches to the condenser intake side of the unit and is hinged for filter cleaning.(Use with 12-inch Self-Supported Duct #7 or 12-inch Flexible Duct #9.)

7. Self-Supported Warm Air Duct / Negative Pressure Condenser Intake Air Duct - LA481744-041012-inch diameter Self-Supported Exhaust Duct extends up to 10-ft in length.(Used as a warm air exhaust duct or intake duct with negative pressure air plenum.)

8. Ceiling Tile Exhaust Kit - HDK-12MovinCool makes it easy to remove exhaust air. Simply replace your existing ceiling tile with the HDK-12 Ceiling Tile Exhaust Kit. Place the Exhaust Flex Duct on top of the MovinCool unit and insert it into the specially cut ceiling tile.Includes 1) 2-ft x 2-ft Ceiling Tile with 8-ft of 12-inch diameter Flexible Exhaust Duct.

9. Flexible Duct – LAY45771-006012-inch diameter x 8-ft Flexible Air Duct. Can be used in place of the Self-Supported duct.

10. Condensate Pump 115V - 484789-0210No need to bother with manually emptying the tanks. The condensate pump will remove the water automatically to any remote drain. Maximum lift – 17-ft. Includes 3/8-inch diameter x 20-ft length drainage hose + installation hardware.

11. Storage Cover - LA484420-0880Heavy-duty nylon cover (22.75\" x 29.75\" x 45.875\")

12. Indoor Heat Exchanger Plenum - 484350-1200 Improves return airflow to evaporator